Home / Metric Parts / Handlebar Risers for Metric Cruisers with One Inch Diameter Bars / Specific Alloy Components Risers

(c) American Side Road Cycles
SmartCart
(TM) eCommerce System

 Specific Alloy Components

 Stainless Steel Risers - Made in USA

 Stylish highly polished 300 series stainless steel. Absolutely NO pitting or blistering, ever!

  • Riser height is measured from triple clamp to the center of the riser's bar clamp hole.

 4-1/4" Hornet Stainless Steel Risers from Specific Alloy Components - 12mm x 1.75mm Metric Threaded(Set of two): Polished 300 series stainless steel handlebar risers: Bore for 7/8" diameter bars. Standard Risers with thread tapped into base used for mounting- thread sizes available as listed below At this time we are unable to accept American Express to pay for SAC product orders.

 SS-IMP-12M5-87D

 $254.75
 
 

 4-1/4" Hornet Stainless Steel Risers from Specific Alloy Components - 14mm x 2.mm Metric Threaded(Set of two): Polished 300 series stainless steel handlebar risers: Bore for 7/8" diameter bars. Standard Risers with thread tapped into base used for mounting- thread sizes available as listed below At this time we are unable to accept American Express to pay for SAC product orders.

 SS-IMP-14M5-87D

 $254.75
 
 

 4-1/4" Hornet Stainless Steel Risers from Specific Alloy Components - 1/2-20 American Threaded(Set of two): Polished 300 series stainless steel handlebar risers: Bore for 7/8" diameter bars. Standard Risers with thread tapped into base used for mounting- thread sizes available as listed below At this time we are unable to accept American Express to pay for SAC product orders.

 SS HBR CR5-87D

 $254.75
 
 

 Stainless Steel Riser Mounting Bolt Sets 18 - 8 stainless steel bolts with polished caps. Riser bolt kit comes with stainless steel lock washers included.

 

Pair of 10mm x 1.5mm x 40mm, 18-8 stainless steel riser mounting bolts with cap slightly crowned (pair includes lockwashers) (Set of two):

 SS-10MBK-40

 $22.10
 
 

 

 

 

Pair of 10mm x 1.5mm x 55mm, 18-8 stainless steel riser mounting bolts with cap slightly crowned (pair includes lockwashers) (Set of two):

 SS-10MBK-55

 $25.60
 
 

 

 

Pair of 10mm x 1.5mm x 60mm, 18-8 stainless steel riser mounting bolts with cap slightly crowned (pair includes lockwashers) (Set of two):

 SS-10MBK-60

 $26.20
 
 

 

 

Pair of 12mm x 1.75mm x 40mm, 18-8 stainless steel riser mounting bolts with cap slightly crowned (pair includes lockwashers) (Set of two):

 SS-12MBK-40

 $22.10
 
 

 

 

Pair of 12mm x 1.75mm x 55mm, 18-8 stainless steel riser mounting bolts with cap slightly crowned (pair includes lockwashers) (Set of two):

 SS-12MBK-55

 $25.60
 
 

 

 

Pair of 12mm x 1.75mm x 60mm, 18-8 stainless steel riser mounting bolts with cap slightly crowned (pair includes lockwashers) (Set of two):

 SS-12MBK-60

 $26.20
 
 

 

 

Pair of 12mm x 1.75mm x 65mm, 18-8 stainless steel riser mounting bolts with cap slightly crowned (pair includes lockwashers) (Set of two):

 SS-12MBK-65

 $26.20
 
 

 

 

Pair of 14mm x 2.mm x 60mm, 18-8 stainless steel riser mounting bolts with cap slightly crowned (pair includes lockwashers) (Set of two):

 SS-14MBK-60

 $26.20
 
 

 

 

Pair of 14mm x 2.mm x 65mm, 18-8 stainless steel riser mounting bolts with cap slightly crowned (pair includes lockwashers) (Set of two):

 SS-14MBK-65

 $26.20
 
 

 

 

Pair of 14mm x 2.mm x 70mm, 18-8 stainless steel riser mounting bolts with cap slightly crowned (pair includes lockwashers) (Set of two):

 SS-14MBK-70

 $26.20
 
 

 

1/2-20 x 1-1/4" 18-8 stainless steel riser mounting bolts with cap slightly crowned (pair includes lockwashers) (Set of two):

 SS HBR 125BK

 $22.10
 
 

 

1/2-20 x 2-3/4" 18-8 stainless steel riser mounting bolts with cap slightly crowned (pair includes lockwashers) (Set of two): for for rubber mounted

 SS HBR 275BK

 $26.20
 
 

(c) American Side Road Cycles
SmartCart
(TM) eCommerce System

Specific Alloy Components

Specializing in unique fits and applications is what we do............. From our "Tiltback" risers to our oem fit Springer® risers, as well as metric threaded bases and even risers with metric hubs on the base, we bring solutions to the rider who is looking to get the right fit the first time. Why use our risers? Because unlike Tee bars, you can adjust handlebars in risers to fit your comfort zone and unlike risers made from other materials, our risers will not strip out easily and they do hold the bars securely. Strength, diversity and show quality make us proud in what we produce.

Warranty and Disclaimer

Warranty Policy..........A great deal of care goes into the making of every Specific Alloy Components, Inc. product. If you should happen to find a problem with any of our products, which is found to be our responsibility, we will replace or repair that product at our discretion. Specific Alloy Components, Inc. cannot be held liable for parts failure resulting from improper installation or handling, or due to misuse or unintended use of our products.

WE SPECIFICALLY DISCLAIM ANY IMPLIED WARRANTIES, INCLUDING OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ALL WARRANTIES LIMITED TO A MAXIMUM OF THE PURCHASE PRICE. DEALERS WAIVE ANY AND ALL CLAIMS FOR CONSEQUENTIAL OR SPECIAL DAMAGES.

Return Policy........All returns require prior authorization and must be issued a return code. There will be a 15% restocking fee on returns not covered by our warranty policy. Packages sent without code may be subject to being refused and shipping and handling is the responsibility of the sender.

FITS: Specific Alloy Components, Inc. will continue and make every effort to provide as accurate as possible fits information. The information provided by us will be best known at the time this data publicated. Our suggested cross reference information is subject to errors for the following reasons. Some pre owned makes and models have been modified, customized, altered, fit with other then stock components, or had things done to cause variations. Some oem information may be misrepresented due to either all digits of model numbers not given, or same model but different styles apply. Some data acquired as second hand information from other sources. All Specific Alloy Components, Inc. products are sold for the purpose of custom aftermarket use only. We do care about customer satisfaction, so please feel free to contact us if you feel there is a dicrepancy.

REFERENCES: All manufacturer brand names such as BMW, BSA, Buell, Harley, Harley-Davidson, Honda, Indian,
Kawasaki, Moto-Guzzi, Norton, Suzuki, Triumph, Victory, Yamaha and similar nomenclatures are used in this catalog
for references and descriptive purposes only. All nomenclatures used in this catalog denoting makes, models, styles, or model designations involving letters and/or numbers, or any other similarities are intended for aftermarket fits and references only. Specific Alloy Components, Inc. is not affiliated with any of these manufacturers in any manner. All trademarks or other brand nomenclatures are the property of their respective holders.

NOTE* Springer®,Wide Glide®, Heritage®, Deuce® and Road King® are all registered trademarks of Harley-Davidson®,Inc..
Specific Alloy Components, Inc. is not affiliated with Harley-Davidson®,Inc. in any manner.

NOTE* Sabre® and VTX® are registered trademarks of American Honda® Motor Company,Inc..
Specific Alloy Components, Inc. is not affiliated with American Honda® Motor Company,Incin any manner.

NOTE* Kawasaki Mean Streak® is a registered trademark of Kawasaki® Motor Corporation, USA.
Specific Alloy Components, Inc. is not affiliated with Kawasaki® Motor Corporation, USA in any manner.

Specific Alloy Components, Inc., Specifically a Solid Design, Tiltback, and Stubby Legs are all trademarks of Specific
Alloy Components, Inc., Springfield, Oregon, U.S.A.