(c) American Side Road Cycles
SmartCart(TM) eCommerce System
Order Your
American Made Leatherworks Saddlebags Below, but first Read the following:
Shipping
Costs: We will add
shipping costs to your order and charge you shipping only at
actual cost.
All order
within the Continental United States are shipped via UPS ground.
UPS 3-day Orange or 2-day Blue Label available for rush orders.
CA &
VA deliveries subject to sales tax
If Shopping
Cart Does Not Work: You may need to turn
off any personal fire wall protection programs. If you are still
having problems using our shopping cart system, please place
your order using our Secure On-line
Order Form.
E-Mail and
Mailing List Privacy: American Side Road Cycles respects your privacy.
We'll use your e-mail address only when we are confirming your
Internet order, when we answer your questions or notifying you
of changes and updates to the site or other news. We assure you,
we do not make our email list or mailing list available to anyone
for any reason.
COD Orders: At this time we can not accept COD orders
for Leatherworks products.
Leatherworks 111P Deluxe Large Angle Saddlebags with Pocket on Rear (can be ordered without rear pocket):Measures 12"x13"x7" Box-top lid, black welting, long travel straps, pocket on the back. The 111P model bag shown here is plain with long straps.
The
111P Angle Saddlebag measures 12"x13"x7". Smooth lines, clean corners and great modern styling highlight the Leatherworks 111P Deluxe Large Angle Saddlebags that feature a contoured lid and welt trimmed edges. A rear pocket may be added for extra storage. They can be made zipper detachable with a yoke
or bolt on ready to work with the Easy Bracket or another direct
bolt on kit. .
The Leatherworks prides
itself on the American Made quality workmanship that is put into
every motorcycle saddlebag. You'll also find great classic styling
with a rare attention to detail. The Leatherworks, Inc., founded
in 1976, makes handcrafted Saddlebags with uncompromising care
from premium 10 ounce, American-tanned harness and Latigo leather.
All Leatherworks Saddlebags and Tool
Bags are designed to fit on stock motorcycles. We recommend that
you allow 1-1/2 inch to 2 inches clearance from the exhaust. All
Bags are warranted against defects in workmanship. The Leatherworks
cannot be held responsible for damage due to improper fit or
improper installation.
Order
Your Leatherworks Saddlebags Below
If you
are purchasing bolt-on ready bags and are NOT purchasing the
Easy Bracket hardware system from us, please let us know, by
writing it in the Comments section of your order, what type of
saddlebag bolt-on system you intend to use (If you're purchasing
Easy Brackets from somewhere else, that's fine, just let us know).
Although this information is optional, if we know, then we can
make sure you have the right type of reinforcement and perhaps
help to intercept any problems.
Step
One, Order bags for your Bike, then hit the Continue
Shopping button and move onto Step Two
Step
Two, after step one, You Must Select bag type &
Order the "Build-A-Bag" Options that you want
Step
Three, if
needed
Leatherworks
Plain 111P Deluxe Large Angle Saddlebags with Rear Pocket (one on each bag):
(Sold
as a set, one Bag for each side - Saddlebag Bolt-on Hardware Systems and
Support Guards sold separately)
Leatherworks
111P Deluxe Large Angle Saddlebags with Rear Pockets "Build-A-Bag" Options
Every
Leatherworks Bag features handsome Indian Head Nickels, the Leatherworks
exclusive trademark & proof of authenticity
We offer
Easy Brackets Bolt-on Hardware Systems
for the following motorcycle makes. Simply click on the link
to place your order and learn more about the Easy Brackets for
specific motorcycle models:
We have
Saddlebag Guards for at least 25 different Bikes
Information about "Bolt-on
Ready" and "Throw-over" Saddlebags:
For an even stronger saddlebag
with greater structural stability, the Leatherworks has
reinforced all bolt on ready bags with ABS plastic that is the full size of the back, not just strips. The plastic is about 0.25 inches thick. This is done for all bolt on bags and all larger throw over bags, including the 111P saddlebags. (if you order Easy Brackets from American Side Road Cycles, well make sure
you get the proper support).
The Leatherworks "Bolt-on Ready"
saddlebags
have specially reinforced
backs. Mounting hardware
(bolt-on brackets) is not provided. You may purchase this hardware
from your dealer, a trusted aftermarket supplier or from American
Side Road Cycles - the Leatherworks bags are designed to work
with just about any bolt-on system out there. We sell Easy Bracket
brand bolt-on hardware systems that you can purchase with the
bags or separately. The reinforcements are designed to work with
any bolt-on system that is currently on the market. Because the
Leatherworks saddlebags are designed to fit multiple motorcycle
makes and models, as well as just about any OEM and aftermarket
bolt-on system, it is not practical for them to pre-drill the
holes in the back of the saddlebags (can you say "Swiss
cheese"). You'll need to do this to properly fit these saddlebags
to the bolt-on system you select. The other reason is that e