Home / Import Parts / Easy Brackets / Easy Brackets Harley Davidson Saddlebags Support Systems

Easy Brackets Harley Davidson

American Side Road Cycles
SmartCart(TM) eCommerce System

 Easy Brackets Bolt-on Saddlebag Systems for Harley Davidson Bikes:

  • Softails
  • Dyna Glide
  • FXR
  • FLH
  • Sportster
  • Shipping Costs: We will add shipping costs to your order and charge you shipping only at actual cost. All order within the Continental United States are shipped via UPS ground. UPS 3-day Orange or 2-day Blue Label available for rush orders.
  • VA deliveries subject to sales tax
  • If Shopping Cart Does Not Work: You may need to turn off any personal fire wall protection programs. If you are still having problems using our shopping cart system, please place your order using our Secure On-line Order Form.
  • E-Mail and Mailing List Privacy: American Side Road Cycles respects your privacy. We'll use your e-mail address only when we are confirming your Internet order, when we answer your questions or notifying you of changes and updates to the site or other news. We assure you, we do not make our email list or mailing list available to anyone for any reason.
  • COD Orders: At this time we can not accept COD orders for Easy Brackets products.
  • Be sure to read our Terms of Business and Legal Notice

 

 

 Bolt-on Hardware Systems from Easy Brackets! The Easy Brackets System is a clean mount bolt-on system, has its own built-in locking mechanism (versus a padlock based system) and angles out less from the bike versus other brackets systems. (5 degrees versus 10 degrees) . All necessary hardware required to mount the brackets to your motorcycle is provided with your order. You do not need to purchase saddlebag guards or other saddlebag support hardware. The kit comes with four (4) electro-polished stainless steel docking posts and bolts that mount to your motorcycle fender rail. (The docking posts and bolts are electro-polished to give them an attractive chrome-like look.)

Because Easy Brackets are made specifically for your Harley Davidson model, you will receive all of the correct hardware with your order. The docking posts and bolts are especially designed to work perfectly with your Harley Davidson motorcycle, eliminating the hassles of adding spacing washers to either line up the docking posts or to achieve a good, tight fit.

Simply replace your existing fender mounting bolts with longer bolts (provided) and then the docking posts. The brackets then permanently mount to the back of the saddlebags (all mounting hardware provided); the bracket / saddlebag then slides onto the docking posts and secures into place with the built-in, covered, barrel lock. To remove, simply unlock and lift the saddlebags off. (Be sure to check out our handy Easy-Totes that convert your saddlebags into an easy to carry piece of luggage.)

Easy Brackets are made from high-quality 10 to 12 gauge steel and are equipped with a barrel key locking mechanism. This barrel key lock provides extra security and increased safety when the saddlebags are mounted on the motorcycle.

These wonderful bolt-on saddlebag supports provide easy on-off latching for your bags. You don't need an engineering degree or a dedicated afternoon to install. Other than a drill (to drill the holes in your bags), the Easy Brackets do not require any special tools. Most hard, flat back saddlebags work with Easy Brackets. Each side has a carrying capacity of 15 lbs. If you have a detachable backrest and/or luggage rack, simply purchase the correct Easy Bracket kit depending on your situation, or if one isn't directly available, notify us or your dealer so we can ensure the correct hardware is sent with your order-- no need to order additional, costly, adapter kits.

 Harley Davidson Easy Brackets Bolt-on Saddlebag Systems
 All Softails, including Fatboy: Fits on the following:
  • FXST / FXSTI Softail Standard
  • FXSTB / FXSTBI Night Train
  • FXSTS / FXSTSI Springer Softail
  • FXSTC 2007 Softail Custom
  • FLSTF / FLSTFI Fat Boy
  • FLSTN / FLSTNI Softail Deluxe, Heritage Nostalgia & Heritage Special Note: The Softail Deluxe works with the ST-L1, ST-L1HB, ST-L1DB and ST-L1SDDB
  • FLSTS / FLSTSI Heritage Springer (Does not fit Factory Saddlebags)
  • FLSTSC / FLSTSCI Softail Springer Classic
  • FXSTD / FXSTD1 Deuce

 ST-R1   - all models except 2006 FXST, FXSTB, FXSTS and 2007 FLSTF
 This model is used on all softail models except the 2006 & later FXST, FXSTB and FXSTS, 2007 FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB). The docking posts attach to the front two mounting holes in the fender rail. (6 1/4" apart). May only be used with small to medium saddlebags to avoid relocation of turn signals. If turn signals are to be relocated see ST-L1.

 $149.95

 
 
 

 ST-R1HB   - with Hardmount Backrest
  All Softails with Hardmount Backrest except the 2006 & later FXST, FXSTB and FXSTS, 2007 FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB). This is the same bracket as the ST-R1 but comes with different hardware. The docking posts mount outside the backrest. The backrest is not provided and must be purchased seperately.

 $149.95

 
 
 

 ST-R1DB    - with detachable backrest
 All softails with Detachable Backrest except the 2006 & later FXST, FXSTB and FXSTS, 2007 FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB). This is the same bracket as the ST-R1 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be puchased seperately.

 $149.95

 
 
 

 ST-R3HB    - FXSTC 2007 Softail Custom
 This model is used on the 2007 FXSTC, Softail Custom. The docking posts attach to the front two mounting holes in the fender rail outside the backrest. (5-5/8" apart) May only be used with small to medium saddlebags to avoid relocation of turn signals. If turn signals are to be relocated see ST-L1. If the stock backrest is replaced with the detachable backrest use ST-R2DB.

 $149.95

 
 
 

 ST-L1   - all models
 Recommended for larger saddlebags (up to 21" wide). Not used with factory Heritage saddlebags. See HRT Models. This model is used on all softail models. The docking posts attach to the rear two mounting holes in the fender rail (9 1/4" apart). Turn signals must be relocated off the fender to use all ST-L1 models. (except for FXDWG).

 $149.95

 
 
 

 ST-L1DB   - with detachable backrest
 All Softails with Detachable Backrest. Will work with Softail Deluxe with Standard Detachable Backrest. This is the same bracket as the ST-L1 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.

 $149.95

 
 
 

 ST-L1HB   - with Hardmount Backrest
  All Softails with Hardmount Backrest. This is the same bracket as the ST-L1 but comes with longer mounting bolts. The backrest is not provided and must be purchased separately.

 $149.95

 
 
 

 ST-L1SDDB   - with deluxe detachable backrest
 FLSTN: Softail Deluxe with New Deluxe Detachable Backrest. This is the same bracket as the ST-L1 but comes with different hardware. The backrest is not provided and must be purchased seperately.

 $149.95

 
 
 

 ST-R2   - 2006 FXST, FXSTB, FXSTS and 2007 FLSTF
 Used on 2006 FXST, FXSTB and FXSTS and 2007 FLSTF models. The docking posts attach to the front two mounting holes in the fender rail. (5 5/8" apart). May only be used with small to medium saddlebags to avoid relocation of turn signals. If turn signals are to be relocated see ST-L1.

 $149.95

 
 
 

 ST-R2HB   - with Hardmount Backrest
 Used on 2006 FXST, FXSTB and FXSTS and 2007 FLSTF models with Hardmount Backrest. This is the same bracket as the ST-R2 but comes with different hardware. The docking posts mount outside the backrest. The backrest is not provided and must be purchased separately.

 $149.95

 
 
 

 ST-R2DB   - with Detachable Backrest
 Used on 2006 FXST, FXSTB and FXSTS and 2007 FLSTF models with Detachable Backrest. This is the same bracket as the ST-R2 but comes with different hardware.

 $149.95

 
 
 

 DUC-R1   - Deuce, all years
 This models is used on the Deuce, all years. This kit is to be used with a Mounting System for "The Deuce" DMS-EB. The mounting system is a formed chrome plate mounted under the fender rail on the deuce to provide mounting points for the Easy Brackets. The original turn signals remain in the factory location. This model is typicaly used with small to medium saddlebags.

 $149.95

 
 
 

 DMS-EB   - Needed for HD Deuce
  Mounting system for "The Deuce." To be used for mounting Easy Brackets.

 $119.95

 
 
 
 Heritage Softails: FLSTS / FLSTCI Heritage Classic This system is designed to replace all factory hardware on the motorcycle and on the saddlebags while still using the factory Heritage saddlebags. If factory saddlebags are replaced with after market saddlebags use Easy Brackets Models ST-R1 and ST-L1. Will not work with stock Heritage Springer saddlebags.

 HRT-R1    - fits 1999 and earlier
 Fits all Heritage Softails 1999 and earlier. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system. If factory saddlebags are replaced with after market saddlebags, use Easy Brackets Models ST-R1 and ST-L1.

 $149.95

 
 
 

 HRT-R1DB    - with detachable backrest
 Fits all Heritage Softails 1999 and earlier. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system. For use with motorcycles w/ Detachable Backrest. This is the same bracket as the HRT-R1 but comes with different hardware. The docking posts mount outside the detachable backrest hardware. The detachable backrest hardware is not provided and must be purchased seperately. If factory saddlebags are replaced with after market saddlebags use Easy Brackets Models ST-R1 and ST-L1.

 $149.95

 
 
 

 HRT-R2    - fits 2000 - 2002
  Fits Heritage Softails 2000 through 2002. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system. If factory saddlebags are replaced with after market saddlebags use Easy Brackets Models ST-R1 and ST-L1.

 $149.95

 
 
 

 HRT-R2DB    - with detachable backrest
  Fits Heritage Softails 2000 through 2002. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system. For use with motorcycles w/ Detachable Backrest. This is the same bracket as the HRT-R2 but comes with different hardware. The docking posts mount outside the detachable Backrest hardware. The detachable Backrest hardware is not provided and must be purchased seperately. If factory saddlebags are replaced with after market saddlebags use Easy Brackets Models ST-R1 and ST-L1.

 $149.95

 
 
 

 HRT-R3    - for 2003 and newer
 Fits 2003 and newer Heritage Softails. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system. If factory saddlebags are replaced with after market saddlebags use Easy Brackets Models ST-R1 and ST-L1.

 $149.95

 
 
 

 HRT-R3DB    - with detachable backrest
  Fits 2003 and newer Heritage Softails. For use with existing Heritage Saddlebags. Replaces all existing hardware and converts the Heritage bags into a true detachable system. For use with motorcycles w/ Detachable Backrest. This is the same bracket as the HRT-R3 but comes with different hardware. The docking posts mount outside the detachable Backrest hardware. The detachable Backrest hardware is not provided and must be purchased seperately. If factory saddlebags are replaced with after market saddlebags use Easy Brackets Models ST-R1 and ST-L1.

 $149.95

 
 
 
 FLH / Shovelhead :

 FLH-R1
  Older Harley Davidson FLH Models. This model is used on the older FLH models. The docking posts attach to the two mounting holes in the fender rail. Holes must be 7 1/4" center to center. .

 $149.95

 
 
 
 FXR :

 FXR-R1
  Fits FXR Models 1990 to present. Note: Does not fit FXRP. This model is used on the FXR models. The docking posts attach to the front hole in the fender rail and the turn signal hole after the turn signal is relocated off the fender rail. Note: Turn signals must be relocated off the fender on all FXR models. This model is typically used with small to medium saddlebags.

 $149.95

 
 
 

 Dyna Glide:

  • FXD / FXDI Super Glide (96 to Present) (2005 Hard Mount Backrest use DNA-L1SG)
  • FXDC / FXDCI Super Glide Custom (96 to Present)
  • FXDL / FXDLI Low Rider (96 to Present)
  • FXDX / FXDXI Super Glide Sport (96 to 2005)
  • FXDXT / FXDXTI Sport Touring (96 to 2005)
  • FXDWG / FXDWGI Wide Glide (96 to Present)
  • FXDI35 35th Anniversary Super Glide 2006
  • FXDBI Street Bob 2006

 DNA-R1    - Fits 1996 to 2005
 Used on all Dyna models 1996 to 2005. The docking posts attach to the front existing bolt hole and the turn signal hole after the turn signal is relcated. Turn signals is relocated off the fender to use all DNA models.

 $149.95

 
 
 

 DNA-R1HB    - with Hard Mount Backrest
 For Dynas with Hard mount backrest only. Used on all Dyna models 1996 to 2005 with Hard Mount Backrest. This is the same bracket as the DNA-R1 but comes with longer mounting bolts. The backrest is not provided and must be purchased separately.

 $149.95

 
 
 

 DNA-L1DB    - all models 1996 to 2005 with detachable backrest.
 For Dynas with Hard mount backrest only. Used on all Dyna models 1996 to 2005 with detachable Backrest. Use the same docking points as the detachable backrest (10 3/8" apart). The docking posts mount outside the detachable backrest hardware. The detachable backrest hardware is not provided and must be purchased seperately.

 $149.95

 
 
 

 DNA-L1SG    - FXD 2005 Dyna Super Glide with Hard Mount Backrest
 FXD: 2005 Dyna Super Glide with Hard Mount Backrest. This is the same bracket as the DNA-L1DB but comes with different bolts.

 $149.95

 
 
 

 DNA-L2            - fits 2006.
 Fits 2006 Dynas with or without Hard Mount Backrest except FXDWGI. Turn signals must be relocated off the fender all models.

 $149.95

 
 
 

 DNA-L2DB    - with Detachable Backrest.
 Fits all 2006 Dynas except FXDWGI with Detachable Backrest. Use the same docking points as the detachable backrest (10 3/8" apart). The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased separately.

 $149.95

 
 
 

 DNA-L3    - 2006 FXDWGI
  Fits 2006 FXDWGI with or without Hard Mount Backrest.

 $149.95

 
 
 

 DNA-L3DB    - with Detachable Backrest
 Fits all 2006 Dynas FXDWGI with Detachable Backrest. Use the same docking points as the detachable backrest (10 3/8" apart). The docking posts mount outside the detachable Backrest hardware. The detachable Backrest hardware is not provided and must be purchased separately.

 $149.95

 
 
 

 Sportsters:
  • XL 883R
  • XL 883L Low
  • XL 883
  • XL 883 Hugger
  • XL 883C Custom
  • XL 1200C Custom
  • XL 1200R Roadster
  • XL 1200L

 SPT-R1S    - 1994 to 2003 "Slimline"
  This model is used on all sportsters 1994 to 2003. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is the standard Easy Bracket depth. This model may be used if a smaller saddlebag is used and located behind the rear shock. Turn signals must be relocated off the fender on all Sporster models. Note that Leatherworks bags can not have outside pockets for use with the Slimline SPT-R1S Easy Brackets. (will not work on XL1200S).

 $149.95

 
 
 

 SPT-R1    - 1994 to 2003
  This model is used on all sportsters 1994 to 2003. Works with or without hard mount backrest. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is deeper than the standard Easy Bracket to provide clearance outside the rear shock. The model SPT-R1S may be purchased if a smaller saddlebag is used and located behind the rear shock. This model is typically used with small to medium sadlbags. Turn signals must be relocated off the fender on all Sporster models. (will not work on XL1200S).

 $149.95

 
 
 

 SPT-R1DB    - 1994 to 2003 with Detachable Backrest
  With detachable backrest - This is the same bracket as the SPT-R1 but is used with a Detachable Backrest and comes with longer bolts. This model is used on all sportsters 94 to 03. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is deeper than the standard Easy Bracket to provide clearance outside the rear shock. The model SPT-R1S may be purchased if a smaller saddlebag is used and located behind the rear shock. This model is typically used with small to medium sadlbags. Turn signals must be relocated off the fender on all Sporster models. (will not work on XL1200S).

 $149.95

 
 
 

 SPT-R2S    - 2004 and later "Slimline"
  Fits 2004 & later. This is the same bracket as the SPT-R1S but comes with different hardware due to changes made in 2004. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is the standard Easy Bracket depth. This model may be used if a smaller saddlebag is used and located behind the rear shock. Turn signals must be relocated off the fender on all Sporster models. Note that Leatherworks bags can not have outside pockets for use with the Slimline SPT-R2S Easy Brackets. (will not work on XL1200S).

 $149.95

 
 
 

 SPT-R2    - Fits 2004 and later
  Fits 2004 and later. This is the same bracket as the SPT-R1 but comes with different hardware due to changes made in 2004. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is deeper than the standard Easy Bracket to provide clearance outside the rear shock. The model SPT-R2S may be purchased if a smaller saddlebag is used and located behind the rear shock. This model is typically used with small to medium sadlbags. Turn signals must be relocated off the fender on all Sporster models. (will not work on XL1200S).

 $149.95

 
 
 

 SPT-R2SDB    - Fits 2004 and later with Detachable Backrest
  Fits 2004 and later. This is the same bracket as the SPT-R2S but is used with a Detachable Backrest and comes with different hardware. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is the standard Easy Bracket depth. This model may be used if a smaller saddlebag is used and located behind the rear shock. Turn signals must be relocated off the fender on all Sporster models. Note that Leatherworks bags can not have outside pockets for use with the Slimline SPT-R2SDB Easy Brackets. (will not work on XL1200S).

 $149.95

 
 
 

 

 Easy Tote
  Easy Tote : If you want to convert your saddlebags on your Harley Davidson to an easy-to-carry piece of luggage. It's a single strap with special docking posts that connect together the saddlebags when they're off the motorcycle, making them easy to carry. For use with bolt-on style saddlebags only. (From Easy Brackets)

 

 $38.65

 
 
 

 Click here to Return to Leatherworks Saddlebags